.................................................................................................................................................................................................................................................................................................................................

DOWNLOADABLE CONTENT

 

Click on desired heading to jump to selection

1.0 UNITS OF MEASURE
All dimensions are in mm and all loadings are in kg unless stated. 
2.0 LOADINGS
Working conditions vary enormously with regard to both the type of floor and the severity of the application. Load ratings are based on intermittent use on normal truck or trolley applications. Special conditions may apply under any of the following applications or hazards:
ï Uneven floor surface
ï Ramps, cracks, gullies, door guide rails
ï Track or turntable use
ï Power towing or driven wheels and rollers
ï Any application other than manually propelled truck and trolley use
It may be appropriate, in certain circumstances, to select a castor or wheel with a load capacity much greater than appears necessary, please ask our technical sales team for assistance in product selection.
3.0 LUBRICATION
All moving parts are liberally treated with a high quality grease. This forms a protective layer which minimises wear by metal to metal contact. Many swivel castors are fitted with swivel head seals helping to reduce maintenance to a minimum. Where lubrication is necessary, this should be carried out using a pressure oil gun, taking care to ensure that the lubricant reaches the king pin head on single ball race castors.
In addition, heavier duty castors and wheels are often fitted with grease nipples and/or dimpled and drilled axle bolts for replenishment purposes under arduous working conditions.
Nylon wheel bushes are virtually self-lubricating but will benefit from occasional lubrication, particularly in very dusty conditions.
A general purpose lithium based grease is used in most castors with a normal operating temperature range of -30∞c to +130∞c.
3.1 Low temperatures
In low temperatures, the consistency of the grease increases up to a point where the swivel and rolling performance is reduced. For low temperature applications it is recommended that a double ball race castor is used and fitted with low temperature grease. Please ask for details.
3.2 High temperatures
In high temperature applications the grease will operate satisfactorily but will need regular replenishment. This particularly applies in forced draught ovens where the oil component of grease can be volatilised causing carburisation. Castors fitted with high temperature wheels and grease are detailed in the ëSpecial Application Castorsí catalogue. High temperature wheels are listed in the ëSpecial Application Wheelsí catalogue. Please request a copy.
4.0 CASTOR TYPES
In general, castors can be sub-divided into two main types:
4.1 Pressed steel
Pressed steel castors incorporate single or double ball bearing swivel race way construction. The balls run in tracks formed in the fork and top plate pressings which are secured together by a heavily riveted steel king pin.
4.2 Fabricated steel
Usually consisting of precision machined heavy steel forgings housing combinations of tapered roller or ball bearing races. The fork legs are usually securely welded to the swivel head forging giving an extremely strong construction suitable for heavy loads.

FULL CATALOGUE PDFS

INDIVIDUAL SERIES PDFS

MISCELLANEOUS PDFS

 

FULL CATALOGUE PDFS

PDF Name

.....................................

Description

.................................................................................................................................................................................................................

Size (kb)

.....................

FC01

Fabricated Steel Castors Range. 6200

MH02

Materials Handling Catalogue. Includes trucks and trollies, conveying, miscellaneous handling products. 6200

MHR01

Rotacaster Range. 6600

PC01

Pressed Steel Castors Range. 8200

PRE01

Preferred Range. The most popular products from each of the Varley ranges. 6900

SC01

Special Application Castors Range. 6100

SCT01

Manner Tango Range 2500

SW01

Special Application Wheels Range. 4200

FPI

Food Processing Industry products  

INDIVIDUAL SERIES PDFS

PDF Name

.....................................

Description

.................................................................................................................................................................................................................

Size (kb)

.....................

11SOVNY 11SOV series pressed steel castors, nylon wheel. 318
11SOVPN 11SOV series pressed steel castors, polyurethane tyred wheel with nylon centre. 317
11SOVPS 11SOV series pressed steel castors, grey rubber tyred wheel with polypropylene centre. 320
11SOVRN 11SOV series pressed steel castors, blue rubber tyred wheel with nylon centre. 321
22NY 22 series pressed steel castors, nylon wheel. 200
22PN 22 series pressed steel castors, polyurethane tyred wheel with nylon centre. 193
22RN 22 series pressed steel castors, blue rubber tyred wheel with nylon centre. 193
22RT 22 series pressed steel castors, black rubber tyred wheel with cast iron centre. 191
22SU 22 series pressed steel castors, polyurethane tyred wheel with cast iron centre. 192
2SHNY 2SH series twinwheel fabricated steel castors, nylon wheels. 274
2SHPT 2SH series twinwheel fabricated steel castors, polyurethane tyred wheels with cast iron centre. 281
2SL 2SL series low level twinwheel castors. 210
2SLX 'Sceneshifter' with 2SL series low level twinwheel castors. 234
2ST 2ST series twinwheel fabricated steel castors. 292
2SZ 2SZ series twinwheel fabricated steel castors. 244
2V20A 2V20A series twinwheel furniture castors. 388
2V30VPO 2V30V series twinwheel pressed steel castors, polypropylene wheels. 302
2V30VTR 2V30V series twinwheel pressed steel castors, grey thermoplastic rubber tyred wheels with polypropylene centre. 310
4040 4040 series truck locks. 172
55CI 55 series pressed steel castors, cast iron wheel. 178
55NY 55 series pressed steel castors, nylon wheel. 211
55RT 55 series pressed steel castors, black rubber tyred wheel with cast iron centre. 211
55SU 55 series pressed steel castors, polyurethane tyred wheel with cast iron centre. 211
61CI 61 series pressed steel castors, cast iron wheel. 270
61HT 61 series pressed steel castors, high temperature phenolic wheel. 144
61NY 61 series pressed steel castors, nylon wheel. 289
61PN 61 series pressed steel castors, polyurethane tyred wheel with nylon centre. 246
61RN 61 series pressed steel castors, blue rubber tyred wheel with nylon centre. 291
61SP 61 series low level twinwheel pressed steel castors, nylon wheels. 162
61SU 61 series pressed steel castors, polyurethane tyred wheel with cast iron centre. 272
91NY 91 series pressed steel castors, nylon wheel. 200
91PN 91 series pressed steel castors, polyurethane tyred wheel with nylon centre. 203
91RN 91 series pressed steel castors, blue rubber tyred wheel with nylon centre. 203
AF AF series adjustable levelling feet and tube-end fittings. 331
APP APP series pneumatic rubber tyred wheels with polypropylene centre. 241
AS AS series anti-static rubber tyred wheels with cast iron centre. 116
ASP ASP series pneumatic rubber tyred wheels with pressed steel centre. 247
ASR ASR series black rubber tyred wheels with pressed steel centre. 92
AXKIT AXKIT axle sets. 75
BS4X 'Sceneshifter' with BS4 series pressed steel castors. 255
BUF BUF series rotating fuffers for tubular equipment. 110
CARGO CARGO series inverted pressed steel castors. 147
CF CF series single flanged cast iron wheels. 151
CV CV series 'V' grooved cast iron wheels. 131
E70PRNY E70 series low level fabricated steel castors, nylon wheel. 166
E70PRPT E70 series low level fabricated steel castors, polurethane tyred wheel with steel centre. 168
EHSU EH series fabricated steel castors, polyurethane tyred wheel with cast iron centres. 222
FN FN series high temperature rubber tyred wheels with thermoplastic centre. 105
FS FS series high temperature thermoplastic wheels. 106
GATE Gate support castor. 120
GK GK series Tango castors, bolt hole fixing. 209
GKAX GKAX series anti-static Tango castors, bolt hole fixing. 347
GKL GKL series Tango castors, plate fixing. 257
GKLAX GKLAX series anti-static Tango castors, plate fixing. 397
GKR GKR series Tango castors, thread fixing. 249
GKRAX GKRAX series anti-static Tango castors, thread fixing. 393
GKT GKT series Tango castors, expander fixing. 214
GR GR series abrasion resistant rubber tyred wheels with aluminium centre. 74
GTSU GT series fabricated steel castors, polyurethane tyred wheel with cast iron centre. 222
GWB GWB series wheelie bin wheels. 110
HESO HE and SO series ball bearing turntables. 229
I20BR I20 series stainless steel castors, blue rubber tyred wheel with nylon centre. 250
120GR I20 series stainless steel castors, grey rubber tyred wheel with polypropylene centre. 287
I20HTPO I20HT series high temperature stainless steel castors, thermoplastic wheel. 236
I20HTRN I20HT series high temperature stainless steel castors, rubber tyred wheel with thermoplastic centre. 220
I20NY I20 series stainless steel castors, nylon wheel. 286
I20PN I20 series stainless steel castors, polyurethane tyred wheel with nylon centre. 266
I20SOFT I20 series stainless steel castors, soft polyurethane tyred wheel with nylon centre. 273
I40NY I40 series stainless steel castors, nylon wheel. 194
I40PN I40 series stainless steel castors, polyurethane tyred wheel with nylon centre. 207
I40SOFT I40 series stainless steel castors, soft polyurethane tyred wheel with nylon centre. 199
JA JA series fabricated steel jacking castors. 184
JA210 JA210 series fabricated steel jacking castors. 128
JSC JSC series fabricated jacking units fitted with BS4 and BS5 series pressed steel castors. 231
KDL KDL series slewing rings. 174
KVHT KVHT series high temperature fabricated steel castors, cast iron wheel. 207
LN L and N series ball bearing turntables. 165
M20HTPO M20HT series high temperature pressed steel castors, thermoplastic wheel. 236
M20HTRN M20HT series high temperature pressed steel castors, rubber tyred wheel with thermoplastic centre. 234
M34POLY M34 series shock absorbing castors, polyurethane tyred wheel with cast iron centre. 188
M34RUBBER M34 series shock absorbing castors, black rubber tyred wheel with aluminium centre. 188
NY NY series nylon wheels. 36
PCP PCP series pneumatic rubber tyred wheels with polypropylene centre. 135
PT PT series polyurethane tyred wheels with cast iron centre. 36
PTR PTR series pallet truck load rollers. 161
PTS PTS series pallet truck steer wheels. 215
PTW PTW series pneumatic rubber tyred wheels with pressed steel centre. 131
SHEPHERD SHEPHERD ball type furniture castors. 337
SJE SJE series nil-offset pressed steel scaffolding castors. 318
SLNY SL series fabricated steel castors, nylon wheel.. 262
SLPN SL series fabricated steel castors, polyurethane tyred wheel with nylon centre. 268
SLSU SL series fabricated steel castors, polyurethane tyred wheel with cast iron centre. 266
SPG SPG series glass handling castors. 141
SSD SSD series pressed steel scaffolding castors. 190
SSH SSH series shock absorbing fabricated steel castors. 304
SSNT SS series pressed steel scaffolding castors, polyurethane tyred wheel with nylon centre. 190
SSNY SS series pressed steel scaffolding castors, nylon wheel. 188
STAR STARLOCK fixing washers. 96
TFHTRACK TFH series fabricated steel castors fitted with single flanged or 'V' frooved cast iron wheels. 234
TLCH TLCH series truck locks. 148
TLCM TLCM series side plate fixing truck locks. 160
TSHGR TSH series fabricated steel castors, abrasion resistant rubber tyred wheel with aluminium centre. 311
TSHNY TSH series fabricated steel castors, nylon wheel. 305
TSHPT TSH series fabricated steel castors, polyurethane tyred wheel with cast iron centre. 309
TSKET TSK series fabricated steel castors, polyurethane tyred wheel with aluminium centre. 243
TSKPC TSK series fabricated steel castors, polyurethane tyred wheel with cast iron centre. 242
TSKSR TSK series fabricated steel castors, black rubber tyred wheel with aluminium centre. 244
TSY TSY series fabricated steel castors. 226
V30VPO V30V series pressed steel castors, polypropylene wheel. 294
V30VTR V30V series pressed steel castors, grey thermoplastic rubber tyred wheels with polypropylene centre. 298
V40VBL V40V series pressed steel castors, black rubber tyred wheel with polypropylene centre. 321
V40VBR V40V series pressed steel castors, blue rubber tyred wheel with nylon centre. 327
V40VGR V40V series pressed steel castors, grey rubber tyred wheel with polypropylene centre. 325
V40VNY V40V series pressed steel castors, nylon wheel. 322
V40VPN V40V series pressed steel castors, polyurethane tyred wheel with nylon centre. 322
V40VSR V40V series pressed steel castors, black rubber tyred wheel with pressed steel centre. 323
V50AAP V50A series pressed steel castors, polyurethane tyred wheel with aluminium centre. 199
V50AAR V50A series pressed steel castors, black rubber tyred wheel with aluminium centre. 202
V50ANY V50A series pressed steel castors, nylon wheel. 198
V50APT V50A series pressed steel castors, polyurethane tyred wheel with cast iron centre. 199
V70VNY V70V series pressed steel castors, nylon wheel. 354
V70VPN V70V series pressed steel castors, polyurethane tyred wheel with nylon centre. 360
V70VTR V70V series pressed steel castors, thermoplastic rubber tyred wheel with nylon centre. 359
V90APP V90A series pressed steel castors, pneumatic rubber tyred wheel with polypropylene centre. 241
V90ASP V90A series pressed steel castors, pneumatic rubber tyred wheel with pressed steel centre.  247
V95A V95A series CARRYMASTER levelling castors. 234
VA V series ball transfer units, thread fixing. 96
VB V series ball transfer units, thread and cup fixing. 97
VBW VBW series black rubber tyred wheels with pressed steel centre. 139
VC V series ball transfer units, circular flange fixing. 99
VD V series ball transfer units, rectangular plate fixing. 98
VE V series ball transfer units, elliptical plate fixing. 94
VEPR VEPR series black rubber tyred wheels with polypropylene centre. 137
VF V series ball transfer units, circular flange and spring clip fixing. 93
VG V series spring loaded ball transfer units, press fit. 93
VGB VGB series black rubber tyred wheels with polypropylene centre. 112
VH V series ball transfer units, press fit. 91
VJ V series ball transfer units, thread fixing. 95
VMC VMC series puncture proof microcellular rubber tyred wheels with polypropylene centre. 89
VNS VNS series black rubber tyred wheels with pressed steel centre. 114
VPD VPD series black rubber tyred wheels with offset hub polypropylene centre and hub cap. 92
VPW VPW series black rubber tyred wheels with polypropylene centre. 141
WANHT WANHT series high temperature phenolic wheels. 95
WASTE V40L series pressed steel castors, wheelie bin wheels and axles for waste container applications. 635
WCI WCI series cast iron wheels. 33
WGR WGR series 'V' grooved cast iron wheels. 113
WNY WNY series nylon wheels. 30
WPN WPN series polyurethane tyred wheels with nylon centre. 32
WRN WRN series blue rubber tyred wheels with nylon centre. 34
WRT WRT series black rubber tyred wheels with cast iron centre. 31
WSPCN WSP series fabricated steel castors, nylon wheel. 238
WSPHR WSP series fabricated steel castors, high performance black rubber tyred wheel with cast iron centre. 242
WSPPT WSP series fabricated steel castors, polyurethane tyred wheel with cast iron centre 245
WSU WSU series polyurethane tyred wheel with cast iron centre. 58
     

MISCELLANEOUS PDFS

PDF Name

.....................................

Description

.................................................................................................................................................................................................................

Size (kb)

.....................

Guide1

Selection Guide to replacing or matching an existing castor. 300

Guide2

Selection Guide to choosing a castor for a new application. 300

Guide3

Selection Guide to choosing or identifying a wheel. 300

IF01-6

Credit Account Application form. 27

TI01

Technical Information leaflet. 870
information banner - same day dispatch, 8000 products available, free delivery on orders over 20 pounds